Corepad HYPER Donuts 9.5mm Mouse G+Skatez Universal Use

1. Check if the supplied Corepad Dots or Donuts G+Skatez are the correct size for your mouse.
2. Remove any existing mouse feet completely and carefully using a flat tool (e.g., a plastic spatula). Avoid damage and scratches.
3. Remove all layers, including any foam layers and adhesive, completely with your fingers and the plastic spatula until the holes and screws are visible.
4. Clean the surfaces thoroughly with alcohol wipes and then allow the mouse to dry.
5. Position the Corepad Dots or Donuts G+Skatez precisely and carefully into the corresponding recesses or slots without tilting them. Ensure that they do not rest on any edges.
6. Recheck that the Corepad Dots or Donuts G+Skatez are correctly seated in the corresponding recesses or slots.
7. Press each Corepad Dots or Donuts G+Skate individually with your fingers again.

Question: What are Corepad Skatez made off?
Answer: Corepad Skatez are only made of the finest materials - quality pure PTFE * and 3M self-adhesive foil - something else is quiet out of the question.

Question: Are Corepad Skatez available in black?
Answer: No, only pure PTFE * is white and therfore has the best slide characteristics. For coloring PTFE * colors must be added which always degrade the sliding properties. Colored mouse feet may additionally been stretched with cheap plastics in order to reduce production costs. Corepad makes no compromises in quality - therefore Corepad Skatez are only available in white.

Question: Do the Corepad Skatez wearout quickly?
Answer: In order to minimize friction and to allow a more comfortable sliding Corepad Skatez have to wearout. The wear out is of course dependent on the mouse pad and your individual usage characteristics. Therefore, you will always receive two pairs of Corepad Skatez for two applications.

* PTFE = polytetrafluoroethylene - Colloquially this plastic is often referred to by the trade name Teflon® DuPont ™

Logitech G PRO X SUPERLIGHT Series
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: partially - Donuts: partially

Logitech G PRO Series
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: No - Donuts: No

Razer DeathAdder V2 PRO
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: partially - Donuts: No

Razer DeathAdder V3
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: No

Razer DeathAdder V4
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

Razer Viper Mini Signatur Edition
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: No

Razer Viper V2
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: No

Razer Viper V3
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

Lamzu Maya X 8K Wireless
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

FinalMouse ULX & Starlight Series
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

Pulsar X2 Series
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

Pulsar X2 CL CrazyLight
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

Pulsar X3 Series
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

Pulsar X3 CL CrazyLight
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

Pulsar XLITE Series
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: partially

Pulsar TenZ Signature Edition
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

Pulsar ZywOo The Chosen
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

HITSCAN Hyperlight 8K
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

Scyrox V6 Superlight
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

Scyrox V8 Superlight
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes

We can only list the most commonly used models here – generally, DOTS can be used with any mouse – while donuts can only be used where the cutout is the right size. The appropriate thickness for DOTS and DONUTS depends on the thickness of the mouse feet – we recommend determining this using the Corepad PRO Skatez as a guide.

30 Donuts

Brand:
Corepad is a registered trademark of Com-Tra.de / Owner Maik Schoephoerster
Manufacturer:
Com-Tra.de / Owner Maik Schoephoerster, Liegnitzer Str. 6, 32312 Luebbecke, Germany
Contact:
E-Mail: Service@Com-Tra.de

Documentation (Multilingual):

• Declaration of Conformity
• Product Safety

Warnings: