Properties
Corepad ONYX Donuts G+Skatez
ONYX stands for ► Black refined High Quality PTFE* ► Increased Durability ► Balanced Speed ► Smooth Gliding ► Good Control ► Good Stopping Power ► Recommended for use on Glass Mousepads ► also suitable for fabric mouse pads
G stands for ► Special Dome Shaped ► Convex ► curved outward ► Optimized for Glass Mousepads
PLUS stands for ► PORON® Foam Layer ► Shock-absorbing ► Sound dampening ► Silent
Technical Data
There are two options available:
- 0,75 mm Pressing Thickness ► 0,90 mm Thickness ► 9,50 mm Outer Diameter ► 5,00 mm Inner Diameter
- 0,85 mm Pressing Thickness ► 1,00 mm Thickness ► 9,50 mm Outer Diameter ► 5,00 mm Inner Diameter
Construction
1. Corepad G+Skatez are of course self-adhesive ► Only high-quality 3M™ self-adhesive film is used ► 3M™ is a trademark of the 3M Company
2. Corepad G+Skatez features a PORON® Foam Layer ► Shock-absorbing ► Sound dampening ► Silent ► PORON® is a trademark of Rogers Corporation
3. Corepad G+Skatez are made from refined High Quality PTFE*
Corepad makes no compromises when it comes to the choice of materials. Therefore, you can be sure that with Corepad G+Skatez you always receive the best quality.
* PTFE = Polytetrafluoroethylene - Colloquially, this plastic is often referred to by the trade name Teflon® from DuPont™.
Application Possibilities
With the Corepad Dots & Donuts G+Skatez, Corepad offers you the opportunity to customize any mouse for use on glass mousepads. You can actively and individually implement your own wishes (arrangement / quantity / dots / mini donuts / donuts). There are a wide variety of possibilities ► here are a few examples:
1. Dots & Donuts can be used individually or mixed on large surfaces.
a. The less ► the faster
b. to e. ... there are many variations in between
f. The more ► the slower
2. Only Dots can be used on small or narrow surfaces.
- Check if the supplied Corepad Dots or Donuts G+Skatez are the correct size for your mouse.
- Remove any existing mouse feet completely and carefully using a flat tool (e.g., a plastic spatula). Avoid damage and scratches.
- Remove all layers, including any foam layers and adhesive, completely with your fingers and the plastic spatula until the holes and screws are visible.
- Clean the surfaces thoroughly with alcohol wipes and then allow the mouse to dry.
- Position the Corepad Dots or Donuts G+Skatez precisely and carefully into the corresponding recesses or slots without tilting them. Ensure that they do not rest on any edges.
- Recheck that the Corepad Dots or Donuts G+Skatez are correctly seated in the corresponding recesses or slots.
- Press each Corepad Dots or Donuts G+Skate individually with your fingers again.
Answer: This question is difficult to answer definitively, as there are now so many different glass mousepads that we can't test them all, especially since certain models are often only available in limited quantities.
Question: What thickness and shape of Corepad G+Skatez do I need?
Answer: This depends entirely on the mouse you're using. The thickness of the Skatez varies depending on the model. Whether DOTS, Mini Donuts, or Donuts are suitable for your mouse depends on the size of the Skatez under your mouse and also on your preferred gliding properties. With DOTS, Mini Donuts, and Donuts, you can choose to influence these properties yourself. The more of each you use, the larger the contact area becomes, but also the friction and therefore the noise level – meaning the mouse will be slower but also louder.
Question: Do Corepad G+Skatez wear out?
Answer: To minimize friction and allow for smoother gliding, the Corepad G+Skatez need to wear down. The rate of wear naturally depends on the mousepad used and your individual usage patterns. Therefore, you always receive enough Corepad Dots or Donuts G+Skatez for many applications.
Logitech G PRO X SUPERLIGHT Series
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: partially - Donuts: partially
Logitech G PRO Series
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: No - Donuts: No
Razer DeathAdder V2 PRO
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: partially - Donuts: No
Razer DeathAdder V3
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: No
Razer DeathAdder V4
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
Razer Viper Mini Signatur Edition
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: No
Razer Viper V2
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: No
Razer Viper V3
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
Lamzu Maya X 8K Wireless
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
FinalMouse ULX & Starlight Series
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
Pulsar X2 Series
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
Pulsar X2 CL CrazyLight
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
Pulsar X3 Series
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
Pulsar X3 CL CrazyLight
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
Pulsar XLITE Series
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: partially
Pulsar TenZ Signature Edition
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
Pulsar ZywOo The Chosen
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
HITSCAN Hyperlight 8K
Thickness: 0.75mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
Scyrox V6 Superlight
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
Scyrox V8 Superlight
Thickness: 0.85mm
DOTS: Yes - Mini Donuts: Yes - Donuts: Yes
We can only list the most commonly used models here – generally, DOTS can be used with any mouse – while donuts can only be used where the cutout is the right size. The appropriate thickness for DOTS and DONUTS depends on the thickness of the mouse feet – we recommend determining this using the Corepad PRO Skatez as a guide.
Corepad is a registered trademark of Com-Tra.de / Owner Maik Schoephoerster
Manufacturer:
Com-Tra.de / Owner Maik Schoephoerster, Liegnitzer Str. 6, 32312 Luebbecke, Germany
Contact:
E-Mail: Service@Com-Tra.de
Documentation (Multilingual): Warnings:
